Argo TABLO EVO Kullanım Talimatları Kılavuzu - Sayfa 5

Fan Argo TABLO EVO için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Argo TABLO EVO 10 sayfaları.

FAN ASSEMBLY INSTRUCTIONS

The device does not require installation. For its use it is necessary to assemble the parts, as per the instructions below.

Open the package and take out the parts of the appliance.

Remove the Blade Cap from the Motor Shaft by turning it clockwise, and remove the Plastic Mounting Nut from the Fan

Head by rotating anti-clockwise. Put the Rear Fan Grill on the Fan Head by align the Position Holes and Lock the Plastic

Mounting Nut on to the Fan Head to fix the Rear Fan Grill on to the Fan Head. Do not over force the Plastic Mounting Nut.

Make the fan blade Groove aligns with a T-bar on the motor shaft to ensure correct positioning and fix the fan blade into

place by hand tightening the blade cap anticlockwise gently onto the end of the motor shaft.

Finally, before place the front fan grill into right position of the guard ring with guard self-clip, please make sure the Limit

groove of guard Ring is on the upward side and the guard self-clip is on the downward side. The screw at the bottom of the

guard ring must be fixed after the assembly of front fan.

V 01/21