Cisco ASA 5506-X Donanım Kurulum Kılavuzu - Sayfa 7

Ağ Donanımı Cisco ASA 5506-X için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco ASA 5506-X 26 sayfaları. Threat defense reimage guide
Ayrıca Cisco ASA 5506-X için: Hızlı Başlangıç Kılavuzu (10 sayfalar), Hızlı Başlangıç Kılavuzu (14 sayfalar), Kolay Kurulum Kılavuzu (11 sayfalar), Yazılım Kılavuzu (37 sayfalar), Montaj ve Bağlantı (12 sayfalar), Kurulum Kılavuzu (46 sayfalar), Şasiyi Monte Edin (10 sayfalar)

Sayfayı Yazdır
Cisco ASA 5506-X Donanım Kurulum Kılavuzu
About the ASA 5506-X
1
2
3
4
5
6
7
8
Online Only
LED
Description
Status LEDs
The locations and meanings of the status LEDs are described in
on page
Power cord socket
The chassis power-supply socket. See
information about the chassis power supply. (The ASA is powered on when
you plug in the DC power supply.)
Network data ports
Eight Gigabit Ethernet RJ-45 (8P8C) network I/O interfaces. The ports are
numbered (from left to right) 1, 2, 3, 4, 5, 6, 7, 8. Each port includes a pair of
LEDs, one each for connection status and link status. The ports are named and
numbered Gigabit Ethernet 1/1 through Gigabit Ethernet 1/8. See
Ports, on page 5
Management port
A Gigabit Ethernet interface restricted to network management access only.
Connect with an RJ-45 cable.
Console ports
Two serial ports, a mini USB Type B, and a standard RJ-45 (8P8C), are provided
for management access via an external system. See
5
for additional information.
USB port
A standard USB Type A port is provided that allows the attachment of an
external device, such as mass storage. See
on page 6
Reset button
A small recessed button that if pressed for longer than three seconds resets the
ASA to its default "as-shipped" state following the next reboot. Configuration
variables are reset to factory default. However, the flash is not erased and no
files are removed.
Note
Lock slot
The slot accepts a standard Kensington T-bar locking mechanism for securing
the ASA.
4.
for additional information.
for additional information.
You can use the service sw-reset-button to disable the reset button.
The default is enabled.
Cisco ASA 5506-X Hardware Installation Guide
Rear Panel
Status Lights,
Power Supply, on page 7
for more
Network
Console Ports, on page
Internal and External Flash Storage,
3