Sony LBT-N355KR Kullanım Talimatları Kılavuzu - Sayfa 12

Stereo sistemi Sony LBT-N355KR için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony LBT-N355KR 32 sayfaları. Compact hi-fi stereo system

Sayfayı Yazdır
Chapter 3:
the
Radio

Listening to the Radio

Presetting Radio Stations
Playing Preset Radio
Stations
EN
12

Chapter 3: the Radio

Listening to the Radio
When you want to play a radio programme,
you can have the tuner automatically scan
the radio frequencies and tune in the
stations with clear signals. This feature
saves you time in searching for stations
with clear signals.
However, stations with weak signals may
be skipped by automatic tuning. Manually
tune in stations with weak signals.
SYSTEM
3,4
POWER ON
1
Press TUNER/BAND repeatedly until
the band you want appears and in the
display.
As you press this button, the band
changes as follows:
FM Z
z AM
TUNER
63
125 250 500
1k
2k
4k
8k
16k
(Hz)
CLIP
MHz
2
Press TUNING MODE repeatedly until
"AUTO" appears in the display.
TUNER
63
125 250 500
1k
2k
4k
8k
16k
(Hz)
DISC PROGRAM
CLIP
MHz
3
Press TUNING +/– buttons (or
on the remote).
The tuner starts scanning radio
frequencies, and stops when it finds a
clear station. "TUNED" appears in the
display. "STEREO" also appears if the
FM station tuned in is broadcasting in
stereo.
TUNER
TUNED STEREO
63
125 250 500
1k
2k
4k
8k
16k
(Hz)
DISC PROGRAM
CLIP
MHz
4
If you don't want to listen to the
selected station, press TUNING +/– (or
/
on the remote) buttons to restart
the scan.
When the desired station is not
tuned in
Automatic tuning may skip the stations
with weak signals and continue scanning
without a stop. In this case, tune in the
station manually.
1 Press TUNING MODE repeatedly until
"MANUAL" appears in the display.
2 Press TUNING +/– buttons repeatedly
until the desired station is tuned in.
To improve AM broadcast reception
Reorient the supplied AM loop aerial for
AM.
STEREO/
MONO
2
1
To change the AM tuning interval
The AM tuning interval is preset to 9 kHz
(10 kHz in some areas) at the factory. If you
need to change the interval, do as follows:
1 Turn on the power.
2 Change the band to AM.
3 Turn off the power.
4 Turn the power back on while pressing
ENTER/NEXT.
After changing the AM tuning interval,
reset the preset AM radio stations. To reset
the interval to the factory setting, follow the
same procedure.
When an FM programme is not received
clearly
Press STEREO/MONO on the unit so that
"MONO" appears in the display. There will
be no stereo effect, but the reception will
VOLUME
improve. Press STEREO/MONO again to
MANUAL
restore the stereo effect.
One Touch Play feature
Press TUNER/BAND (or TUNER/BAND
on the remote) when the power is off or
when you are listening to another sound
VOLUME
source.
AUTO
You can listen to the last received station
without pressing any other buttons.
/
Note
When you listen to a sound source other
than the tuner, you can select the tuner by
pressing TUNER/BAND (Automatic
Source Selection).
VOLUME
AUTO
AM