Sony MEX-BT39UW Sahibinin Kaydı - Sayfa 25

Stereo sistemi Sony MEX-BT39UW için çevrimiçi göz atın veya pdf Sahibinin Kaydı indirin. Sony MEX-BT39UW 45 sayfaları. Bluetooth audio system
Ayrıca Sony MEX-BT39UW için: Şartname Sayfası (4 sayfalar), Kurulum/Bağlantılar (2 sayfalar), Servis Kılavuzu (48 sayfalar)

Sayfayı Yazdır

Mic Gain adjustment

You can adjust the volume for the other party.

Press (5) to adjust the volume levels ("MIC-

LOW," "MIC-MID," "MIC-HI").

Note

Configurable during a call.

EC/NC Mode (Echo Canceller/Noise

Canceller Mode)

You can reduce echo and noise.

Press and hold (5)/ to select to "EC/NC-1" or

"EC/NC-2."

Note

Configurable during a call.

Call transfer

In order to activate/deactivate the appropriate

device (this unit/cellular phone), check the

following.

Press (MODE) or use your cellular

phone.

For details on cellular phone operation, refer to

your cellular phone manual.

Note

Depending on the cellular phone, handsfree

connection may be cut off when call transfer is

attempted.

Preset dial

Contacts (up to 6) in the phonebook of a cellular

phone can be stored in the preset dial.

Press (SOURCE/OFF) repeatedly until

"BT PHONE" appears.

Press and hold a number button ((1)

to (6)) to select the preset number to

store.

"P (preset number) WAITING" appears.

Send the phonebook data by

operating the cellular phone.

The contact is stored in the selected preset

number.

Voice dial activation

You can activate voice dialing with a cellular

phone connected to this unit by saying the voice

tag stored on the cellular phone, then make a call.

Press (SOURCE/OFF) repeatedly until

"BT PHONE" appears.

Press

(handsfree).

"VOICE DIAL" appears.

Say the voice tag stored on the cellular

phone.

Your voice is recognized, and the call is

made.

Notes

• Check that the unit and cellular phone are

connected beforehand.

• Store a voice tag on your cellular phone beforehand.

• If you activate voice dialing with a cellular phone

connected to this unit, this function may not always

work in some cases.

• Noises such as the engine running may interfere

with sound recognition. In order to improve

recognition, operate under conditions where noise is

minimized.

• Voice dialing may not work in some situations,

depending on the effectiveness of the cellular

phone's recognition function. For details, see the

support site (page 21).

Tips

• Speak in the same way as you did when you stored

the voice tag.

• Store a voice tag while seated in the car, via this unit

with "BT PHONE" source selected.

SMS indicator

While connecting a cellular phone to this unit,

the SMS indicator informs you of any incoming

or unread SMS messages.

If you receive a new SMS message, the SMS

indicator flashes.

If there are any unread SMS messages, the SMS

indicator stays lit.

Note

Function of the SMS indicator may depend on the

cellular phone.