Sony MEX-N5000BT Kullanım Talimatları Kılavuzu - Sayfa 26
Stereo sistemi Sony MEX-N5000BT için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MEX-N5000BT 40 sayfaları. Bluetooth audio system
Ayrıca Sony MEX-N5000BT için: Kullanım Talimatları Kılavuzu (32 sayfalar), Kurulum (2 sayfalar)
Some functions do not work.
-+ Check if the connecting device supports the
functions in question.
A call is answered unintentionally.
-+ The connecting phone is set to answer a call
automatically.
Pairing failed due to time out.
-+ Depending on the connecting device, the time
limit for pairing may be short.
-Try completing the pairing within the time.
BLUETOOTH function cannot operate.
-+ Turn off the unit by pressing OFF for more than 2
seconds, then turn the unit on again.
No sound is output from the car speakers during
handsfree call.
-+ If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
Pandora® connection is not possible.
-+ Shut down the Pandora® application on the
mobile device, and then launch again.
Application name is mismatched with the actual
application in App Remote.
-+ Launch the application again from the "App
Remote" application.
While running the "App Remote" application via
BLUETOOTH, the display automatically switches
to [BT AUDIO].
-+ The "App Remote" application or BLUETOOTH
function has failed.
-Run the application again.
ERROR
-+The disc is dirty or inserted upside down.
- Clean or insert the disc correctly.
-+A blank disc has been inserted.
-+ The disc cannot play due to a problem.
- Insert another disc.
-+ USB device was not automatically recognized.
-Connect it again.
-+ Press
~to
remove the disc.
HUB NO SUPRT {hubs not supported)
-+ USB hub is not supported on this unit.
IPD STOP (iPod stop)
-+ When repeat play is not set, playback of the last
track in album finished.
The music application in the iPod/iPhone is
terminated.
-Press PAUSE to start playback again.
26GB
NO DEV (no device)
-+ [USB] is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
-Be sure to connect a USB device and USB cable.
NO MUSIC
-+ The disc or USB device does not contain a music
file.
-Insert a music CD.
-Connect a USB device with a music file in it.
OVERLOAD
-+ USB device is overloaded.
- Disconnect the USB device, then change the
source by pressing SRC.
-The USB device has a fault, or an unsupported
device is connected.
PUSH EJT (push eject)
-+ The disc cannot be ejected.
- Press
~
(eject).
READ
-+ The unit is reading all track and album
information on the disc.
-Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
USB NO SUPRT (USB not supported)
-+The connected USB device is not supported.
-For details on the compatibility of your USB
device, visit the support site.
[L L L L]
or
[ I I
I
I ]
-+ During reverse or fast-forward, you have reached
the beginning or the end of the disc and you
cannot go any further.
[_]
-+ The character cannot be displayed.
For BLUETOOTH function:
BT BUSY {BLUETOOTH busy)
-+The phonebook and the call history of the cellular
phone are not accessible from this unit.
-Wait for a while, an_d then try again.
ERROR
-+ BT Initialize failed.
-+ Phonebook access failed.
-+ Phonebook content was changed while
accessing the cellular phone.
-Access the phonebook in the cellular phone
again.