Sony MEX-N5100BT Kullanım Talimatları Kılavuzu - Sayfa 18
Stereo sistemi Sony MEX-N5100BT için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MEX-N5100BT 42 sayfaları. Bluetooth audio system
Ayrıca Sony MEX-N5100BT için: Kullanım Talimatları Kılavuzu (38 sayfalar)
Sayfayı Yazdır
Using Siri Eyes Free
Siri Eyes Free allows you to use an iPhone
handsfree by simply speaking into the microphone.
This function requires you to connect an iPhone to
the unit with BLUETOOTH Auto Pairing. Availability
is limited iPhone 4s or later. Make sure that your
iPhone is running the latest iOS version.
You must complete BLUETOOTH registration and
connection configurations for the iPhone with the
unit in advance. For details, see "Preparing a
BLUETOOTH Device" {page 8).
1
Activate the Siri function on the iPhone.
For details, refer to the operating instructions
supplied with the iPhone.
2
Press VOICE.
The voice command display appears.
3
After the iPhone beeps, speak into the
microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate Siri Eyes Free
Press VOICE.
Notes
• The iPhone may not recognize your voice depending
on usage conditions. (For example, if you are in a
moving car.)
• Siri may not function properly, or the response time
may lag in locations where iPhone signals are difficult
to receive.
• Depending on the iPhone's operating condition, Siri
may not function properly, or may quit.
• If you play a track with an iPhone using the
BLUETOOTH audio connection, when the track starts
playback via BLUETOOTH, the Siri function
automatically quits and the unit switches to the
BLUETOOTH audio source.
• When Siri is activated during audio playback, the unit
may switch to the BLUETOOTH audio source even if
you do not specify a track to play.
• When connecting the iPhone to the USB port, Siri may
not function properly, or may quit.
• When connecting the iPhone to the unit, do not
activate Siri with the iPhone. Siri may not function
properly, or may quit.
• There is no audio sound while Siri Eyes Free is
activated.
18GB
Settings
Canceling the DEMO Mode
You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
1
Press MENU, rotate the control dial to
select [SET DISPLAY], then press it.
2
Rotate the control dial to select [SET
DEMO], then press it.
3
Rotate the control dial to select [SET
DEMO-OFF], then press it.
The setting is complete.
4
Press
~
(back} twice.
The display returns to normal reception/play
mode.
Basic Setting Operation
You can set items in the following setup categories:
General setup {GENERAL), Sound setup {SOUND),
Display setup {DISPLAY), BLUETOOTH setup {BT),
SongPal setup {SONGPAL)
{Not available when the BT phone is selected.)
1
Press MENU.
2
Rotate the control dial to select the setup
category, then press it.
The items that can be set differ depending on
the source and settings.
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press
~
(back).
General Setup {GENERAL)
CLOCK-ADJ (clock adjust) (page 7)
CAUT ALM (caution alarm)
Activates the caution alarm: [ON], [OFF] (page 7).
(Available only while the source is off and the
clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].