Cisco ASA 5506W-X Kurulum Kılavuzu - Sayfa 35

Ağ Donanımı Cisco ASA 5506W-X için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco ASA 5506W-X 46 sayfaları. Threat defense reimage guide
Ayrıca Cisco ASA 5506W-X için: Hızlı Başlangıç Kılavuzu (10 sayfalar), Yapılandırma Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (14 sayfalar), Kolay Kurulum Kılavuzu (11 sayfalar), Yazılım Kılavuzu (37 sayfalar), Montaj ve Bağlantı (12 sayfalar), Şasiyi Monte Edin (10 sayfalar)

Cisco ASA 5506W-X Kurulum Kılavuzu
Mount the Chassis
Figure 25: Attaching the DIN Rail Bracket to the ASA 5506H-X
Step 2
Locate the plastic tab on the end of the DIN rail bracket that extends past the chassis. Press the tab in and slide the plastic
latch piece out while the tab is pressed down to put it into the locked position.
Step 3
Turn the chassis sideways so that the power connector is near the top.
Step 4
Position the rear edge of the chassis directly in front of the DIN rail making sure that the DIN rail fits in the space between
the plastic latch and the metal hook.
Step 5
Position the chassis so that the hook on the DIN rail bracket hooks onto the top edge of the DIN rail. The weight of the
chassis can rest on the hook temporarily while the DIN rail bracket latches are secured.
Step 6
Push the DIN rail bracket latch up when the chassis is over the DIN rail to secure it. This snaps the latch into the closed
position which locks it onto the DIN rail.
Online Only
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
Install the ASA 5506H-X in a DIN Rail
31