Sony MHC-LX10000 - High Power Mini Hi-fi System Kullanım Talimatları Kılavuzu - Sayfa 32
Stereo sistemi Sony MHC-LX10000 - High Power Mini Hi-fi System için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-LX10000 - High Power Mini Hi-fi System 39 sayfaları. Limited warranty (us only)
Ayrıca Sony MHC-LX10000 - High Power Mini Hi-fi System için: Kullanım Talimatları Kılavuzu (40 sayfalar), Şartname Sayfası (2 sayfalar), Teknik Özellikler (2 sayfalar), Sınırlı Garanti (1 sayfalar)
Sayfayı Yazdır
The system
cannot
play back
the reverse
side
of the tape in Deck A.
• The system
only can play back front side of the
tape in Deck A. This is not a malfimction.
When
you turn
_
_
clockwise
or
counterclockwise
(or press
-14141 or I_1+
on
the remote),
"Not
in Use" flashes
in the
display.
• The system does not has AMS (Automatic
Music
Sensor) flmction.
This is not a malfimction
If the
system
still
does
not
operate
properly
after
performing
the
above
measures
or other
troubles
does
not
described
above
occur,
reset
the
system
as
follows:
Use bnttons
on the unit for the operation.
1
Unplug the power cord.
2 Plug the power cord back in.
3 Press I/_
to turn on the system.
4 Press m, ENTER and I/_
at the same time.
The system is reset to the factory settings.
You should set the settings you made, such as
the preset stations, clock and timer.
One of the following
messages
may appear or
flash in the display during operation.
Disc
NO STEP
You have cleared all the steps you programmed.
OVER
You have leached the end of the disc while turning
and holding 414 _
clockwise (or pressing
on the remote) during playback or pause.
No Disc
Thele is no disc on the disc flay
Push
STOP!
You have pressed
PLAY MODE
on the lemote
during playback.
Step
Full!
You tiled to program
more than 25 steps.
Reading
The system is reading infbnnation
of the disc
Some
buttons
are not available
Tape
No Tab
You cannot recold the tape becmlse
the tab has been
removed
from the tape.
No Tape
Thele is no tape in the tape deck.
Timer
OFF TIME NG!
The on time and off time of Pla t" Time! or Timer
Recording
is same
SET CLOCK!
You pressed
CLOCK,'TIMER
SELECT
before the
clock is set.
SET TIMER!
You pressed
CLOCK,'TIMER
SELECT
betbre Pla t'
Timel or Timel Recording
is set.
PUSH
SELECT[
You tlied to set the clock o1 time1 during time1
opelation.
Others
Not in Use
You have pressed
a button those opelations
is not
allowed or invalid
at that time.
32us