Sony MHC-MG510AV Kullanım Talimatları Kılavuzu - Sayfa 22

Stereo sistemi Sony MHC-MG510AV için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-MG510AV 41 sayfaları. Sony operating instructions mini hi-fi component system mhc-mg510av,mhc-mg310av,mhc-mg110
Ayrıca Sony MHC-MG510AV için: Kullanım Talimatları Kılavuzu (40 sayfalar)

Sayfayı Yazdır
Recording to a tape (continued)
Recording
a CD by specifying
track
order
- Program Edit
When programmg, make sure the playmg times
for each stde do not exceed the length of one
side of the tape.
1
Load a recordable
tape Into deck B.
2
Press CD.
3 Press PLAY MODE repeatedly
until
"PGM" appears.
4 Turn DISC ACCESS (or press +-DISC
or DISC--r on the remote) to select a
CD.
To program all the tracks on a CD at once,
go to step 6 with "CDAL" displayed.
5 Press - H4 or W
+ (or W
or HI
on the remote) repeatedly
until the
dewed
track appears.
6
Press ENTER.
The track IS programed. The programed
track and corresponding step (playmg order)
appear, followed by the total playmg time.
7 Repeat steps 5 and 6 for the same disc
or 4 to 6 for tracks from another disc to
program additional
discs or tracks.
8
Press CD SYNCHRO.
Deck B stands by to record m the direction
of the mdicatron. The CD player pauses for
play.
9 Press DIRECTION repeatedly
to select
Z
to record on one srde. Select CJ3
(or RELAY) to record on both srdes.
10 Press REC PAUSE/START
Recording starts.
Tip
If you select both stdes recording
and the tape reaches
the end of the front side part-way
through a track, the
entn-e track IS recorded agam from the begmnmg of
the reverse side.
22