Sony MHC-RG55 Kullanım Talimatları Kılavuzu - Sayfa 18

Stereo sistemi Sony MHC-RG55 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-RG55 36 sayfaları. Sony operating instructions mini hi-fi component system mhc-rg66, mhc-rg55s, mhc-rg55

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press DIRECTION repeatedly to select
g to play one side. Select j* to
play both sides.
To play both decks in succession, select
RELAY (Relay Play)**.
3
Press hH (or nN on the remote).
Press the button again to play the reverse
side*. The tape starts playing.
* For MHC-RG55S, deck A doesn't play the reverse
side.
** Relay Play always follows this cyclic sequence up
to five times, then stops:
t Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse side)
For MHC-RG55S, after the playback of the front
side of deck A, deck B repeats the sequence five
times.
GB
18
Tape presence indicator
Reverse
Forward
indicator
indicator
Other Operations
To
Do this
Press x.
Stop play
Press X. Press again to resume
Pause
play.
Press m or M.
Fast-forward
or rewind
Press Z.
Remove
the cassette
Searching for the beginning of the
current or the next track (AMS)*
To go forward
Press > during playback when H lights.
"TAPE A (or TAPE B) >>> +1" appears.
Press . during playback when h lights.
"TAPE A** (or TAPE B) <<< +1" appears.
To go back
Press . during playback when H lights.
"TAPE A (or TAPE B) <<< –1" appears.
Press > during playback when h lights.
"TAPE A** (or TAPE B) >>> –1" appears.
* AMS (Automatic Music Sensor)
** For MHC-RG55S, deck A doesn't play the reverse
side.
Tip
When a tape is inserted, corresponding forward/
reverse indicators light.
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.