Sony MHC-RX70 Kullanım Talimatları Kılavuzu - Sayfa 7
Stereo sistemi Sony MHC-RX70 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-RX70 50 sayfaları. Mini hifi component system
Ayrıca Sony MHC-RX70 için: Kullanım Talimatları Kılavuzu (44 sayfalar), Kullanım Talimatları Kılavuzu (44 sayfalar), Kullanım Talimatları Kılavuzu (44 sayfalar)
Sayfayı Yazdır
3
Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo programme) appear.
AUTO
4
Press TUNER MEMORY.
A preset number appears in the display.
Preset number
AUTO
5
Turn the jog dial to select the preset
number you want.
6
Press ENTER/NEXT.
The station is stored.
7
Repeat steps 1 to 6 to store other
stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly to select
"MANUAL" in step 2, then turn the jog dial
to tune in the station.
To change the preset number
Start over from step 1.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
TUNED
STEREO
instructions of each component.
VOLUME
MHz
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
TUNED
STEREO
Connecting an MD deck for digital
VOLUME
recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
continued
7