Sony MHC-RXD5 Kullanım Talimatları Kılavuzu - Sayfa 25

Stereo sistemi Sony MHC-RXD5 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-RXD5 49 sayfaları.

Sayfayı Yazdır

Repeat steps 5 and 6 for tracks from

the same disc or steps 4 to 6 for

tracks from another disc to program

the remaining tracks to be recorded

on side B.

Press CD SYNC.

Deck B stands by for recording and the

CD player stands by for playback. The

indicator on TAPE B ( (for front side)

lights up.

Press DIRECTION repeatedly to

select A to record on one side.

Select ß (or RELAY) to record on

both sides.

Press REC PAUSE/START.

Recording starts.

To st op recording

Press p.

To check t he order

Press CHECK on the remote repeatedly. After

the last track, "CHECK END" appears.

To cancel Program Edit

Press PLAY MODE repeatedly until

"PROGRAM" or "SHUFFLE" disappears

from the display.

Tip

When you want to reduce the hiss noise in low-level

high-frequency signals, press DOLBY NR so that

"DOLBY NR" appears after pressing CD SYNC.

Downloaded from:

https://www.usersmanualguide.com/

Select ing t ape lengt h

aut om at ically

—Tape Select Edit

You can check the most suitable tape length

for recording a CD. Do the following steps

before recording.

Insert a CD.

Press FUNCTION repeatedly until

"CD" appears in the display.

Press EDIT once, so that "EDIT"

flashes.

The required tape length for the

currently selected CD appears, followed

by the total playing time for side A and

side B respectively.

Not es

• You cannot use Tape Select Edit for discs

containing over 20 tracks.

• You cannot use this function after programming.

In order to use this function, you must first cancel

the program by pressing PLAY MODE repeatedly

until "PROGRAM" or "SHUFFLE" disappears

from the display.