Sony MHC-VX777 Kullanım Talimatları Kılavuzu - Sayfa 32

Stereo sistemi Sony MHC-VX777 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-VX777 36 sayfaları.

Sayfayı Yazdır
Speakers
Sound comes from one channel or unbalanced
left and right volume.
• Check the speaker connection and speaker
placement.
Sound lacks bass.
• Check that the speaker's + and – jacks are
connected correctly.
VIDEO CD/CD Player
There is no picture.
• Check that the player is connected securely.
• Make sure you operate the TV correctly.
• Make sure you set the color system correctly,
according to your TV (color) system.
• Press CD.
The CD tray does not close.
• The CD is not placed properly.
The CD will not play.
• The CD is not lying flat in the disc tray.
• The CD is dirty.
• The CD is inserted label side down.
• Moisture condensation has built up. Remove the
CD and leave the system turned on for about an
hour until the moisture evaporates.
Play does not start from the first track.
• The player is in program or shuffle mode. Press
PLAY MODE repeatedly until "PROGRAM" or
"SHUFFLE" disappears.
"OVER" is displayed.
• You have reached the end of the CD. Press m.

Tape Deck

The tape does not record.
• The tab has been removed from the cassette (see
"To save a tape permanently" on page 30).
• The tape has reeled to the end.
32
10ADD_MHC-VX777/VX555.p65 GB
The tape does not record nor play or there is a
decrease in sound level.
• The heads are dirty. Clean them (see "Cleaning
• The record/playback heads are magnetized.
The tape does not erase completely.
• The record/playback heads are magnetized.
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty. Clean
Noise increases or the high frequencies are erased.
• The record/playback heads are magnetized.
Tuner
Severe hum or noise ("TUNED" or "STEREO"
flashes in the display).
• Adjust the antenna.
• The signal strength is too weak. Connect the
A stereo FM program cannot be received in stereo.
• Press FM MODE so that "MONO" disappears.
If other troubles not described above
occur, reset the system as follows:
1
Press x, ENTER and ?/1 at the same
time.
2
Unplug the power cord.
3
Plug the power cord back in.
4
Press ?/1 to turn on the power.
The unit is reset to factory settings. All the
settings you made are cleared.
32
MHC-VX777/VX555/VX555J 4-232-651-12 (1)
the tape heads" on page 30).
Demagnetize them (see "Demagnetizing the tape
heads" on page 30).
Demagnetize them (see "Demagnetizing the tape
heads" on page 30).
them (see "Cleaning the tape heads" on page 30).
Demagnetize them (see "Demagnetizing the tape
heads" on page 30).
external antenna.
13/03/2001, 5:00 PM