Sony MHC-WZ5 Kullanım Talimatları Kılavuzu - Sayfa 32
Stereo sistemi Sony MHC-WZ5 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony MHC-WZ5 36 sayfaları. Sony operating instructions mini hi-fi component system mhc-wz50, mhc-wz5
Sayfayı Yazdır
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise, the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clean the tape heads before you start an
important recording or after playing an old tape. Use a
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
Demagnetising the tape heads
Demagnetise the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetising cassette. For
details, refer to the instructions of the demagnetising
cassette.
GB
32
Break off the
cassette tab
Specifications
Amplifier section
European model:
DIN power output (rated): 75 + 75 watts (6 ohms at
Continuous RMS power output (reference):
Music power output (reference):
Except for European model:
The following measured at AC 120, 220, 240 V AC,
50/60 Hz (Australian model at 240 V AC, 50/60 Hz,
Korean model at 220 V AC, 60 Hz, Taiwan model at
120 V AC, 50/60 Hz)
DIN power output (rated): 100 + 100 watts (6 ohms at
Continuous RMS power output (reference):
Inputs
MD (VIDEO) IN (phono jacks):
Outputs
PHONES (stereo mini jack):
MD (VIDEO) OUT (phono jacks):
FRONT SPEAKER:
SUB WOOFER (Except for European model):
CD player section
System
Laser
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
1 kHz, DIN)
100 + 100 watts (6 ohms at
1 kHz, 10% THD)
200 + 200 watts (6 ohms at
1 kHz, 10% THD)
1 kHz, DIN)
140 + 140 watts (6 ohms at
1 kHz, 10% THD)
Voltage 450 mV/250 mV,
impedance 47 kilohms
Accepts headphones of
8 ohms or more
Voltage 250 mV,
impedance 1 kilohms
Use only the supplied
speaker SS-WZ50/WZ5/
WZ5E
Voltage 320 mV,
impedance 1 kilohms
Compact disc and digital
audio system
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
2 Hz – 20 kHz (±0.5 dB)
780 – 790 nm
More than 90 dB
More than 90 dB