Sony R-D-S EON MHC-2900 Kullanım Talimatları Kılavuzu - Sayfa 22

Stereo sistemi Sony R-D-S EON MHC-2900 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony R-D-S EON MHC-2900 35 sayfaları.

Sayfayı Yazdır

> continued

1 Press MODE ON.

An audio emphasis file flashes in the

display.

2 Press CURSOR CONTROL towards A

or ¥ to select the audio emphasis you

want.

The display changes as follows :

ROCK «+

CLASSIC «>

JAZZ

FILE 3

VOCAL

FILE 2 «<>

FILE1

«+

POPS

Choose

To get

ROCK

Lively rhythm and

powerful bass

CLASSIC

Sound with a great deal of

reverberation such as

classical music

JAZZ

Percussive sounds,

emphasizing bass audio

VOCAL

Light sound that emphasizes

the vocals

POPS

Instrumental sound that

emphasizes the rhythms

3 Press MODE OFF.

The audio emphasis is now set.

For the customers in the C.1.S.

You can change the display by pressing

DISPLAY button on the unit.

Each time you press the button, the display

changes to show one of the three displays

as follows :

To select the audio emphasis with the

remote commander

Set the TUNER/EQ/CD selector to EQ.

2 Choose the audio emphasis you want by

pressing the numeric buttons.

Chapter 5 : Sound Adjustment

To change the audio emphasis

setting

Repeat the operation above.

To listen to music without any audio

effects

Press EFFECT.

"EFFECT OFF" appears in the display.

This feature can be used when you want to

listen to the music in its pure, unprocessed

state.

You can record sound adjusted using

the sound processing effects

You can use deck B to record the source

currently being played (deck A, tuner, CD,

video, etc.) with a sound effect applied. You

can also mix vocals into the recording

through a microphone.

Note

When recording from a tape in deck A, a

tape recorded with DOLBY NR off should

be used in deck A.

Adjusting the Audio

Emphasis

You can adjust the audio emphasis in the

following two functions:

¢ Graphic equalizer

¢ Surround effect

Adjusting the Sound

You can adjust the sound by raising or

lowering the levels of specific frequency

ranges.

Before operation, first select the audio

emphasis that you want for your basic

sound.

POWER-+ON

1 Press MODE ON twice (or EQ on the

remote commander). "EQUALIZER"

and the equalizer curve appear in the

display.

2 Adjust the sound by pressing CURSOR

CONTROL.

'lorP:

Shifts the frequency range to

be adjusted to the left or to

the right.

Raises or lowers the level of

the frequency range

centering around the flashing

dot.

AorY:

3 Press MODE OFF.

Equalizer curve is now set.

Adjusting the Level of the

Surround Effect

You can enjoy a wide range of effects and

sound by selecting one of four surround

levels (levels 1, 2, 3 and OFF).

Before operation, first select the audio

emphasis that you want for your basic

sound.

POWER—ON

1 Press MODE ON three times (or

SURROUND on the remote

commander).

The current level of the surround effect

appears in the display.

2 Press CURSOR CONTROL towards &

or ¥ to select the level of the surround

effect.

3 Press MODE OFF.

Surround effect level is now set.