Sony RG444S Kullanım Talimatları Kılavuzu - Sayfa 14
Stereo sistemi Sony RG444S için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony RG444S 48 sayfaları. Sony operating instructions owner's record mini hi-fi component system mhc-gx750, gx450, gx250, mhc-rg555, rg551s, rg444s, rg441, rg333, rg222, rg221, rg121, rg100, mhc-rx550
Creating your own
program
— Program Play
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 19).
MP3 audio tracks cannot be played on
MHC-GX250, MHC-RG121 and MHC-RG100.
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
Press PLAY MODE repeatedly in stop
mode until "PGM" appears.
3
Press DISC SKIP (or DISC 1 – 3 or DISC
SKIP/EX-CHANGE on the unit) to select
a disc.
4
Press . or > repeatedly (or turn
l L on the unit) until the desired
track number appears.
When programming the MP3 audio tracks,
press ALBUM – or + to select album, then
press . or > repeatedly (or turn l
L on the unit) until the desired track
number appears.
Disc tray number
5
Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
14
GB
Selected track number
Total playing time (including
selected track)
6
Program additional tracks.
To program
Other tracks on the
same disc
Other tracks on
other discs
7
Press N.
Program Play starts.
Other operations
To
Do this
Cancel Program
Press PLAY MODE repeatedly
Play
in stop mode until "PGM"
disappears.
Clear a track from
Press CLEAR in stop mode.
the end
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
(or FUNCTION repeatedly) to switch the function to
CD, then press N. However, the program is cleared
when you open the disc tray.
• "– –.– –" appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 audio track.
Repeat steps
4 and 5
3 to 5