Sony SA-NS300 Kullanım Talimatları Kılavuzu - Sayfa 9

Stereo sistemi Sony SA-NS300 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony SA-NS300 40 sayfaları. Wireless network speakers
Ayrıca Sony SA-NS300 için: Kullanım Talimatları (2 sayfalar), Talimat ve Kullanım Kılavuzu (14 sayfalar), Önemli Güvenlik Talimatları (1 sayfalar), Teknik Özellikler (4 sayfalar), Sınırlı Garanti (1 sayfalar), Hızlı Kurulum (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Rear

E LINK indicator

Indicates the connection status of the

wired/wireless LAN.

Green: Wireless connection (page 14).

Amber: Wired connection (page 18).

Red: The following status have occurred.

– This unit cannot find the wireless

LAN access point.

– The security method/password

selected for the access point is wrong.

– An error has occurred.

Not lit: The wireless network setting

process is not finished.

F WPS button

Use to make the network settings for the

WPS push button configuration (page 16).

G AUDIO IN button/indicator

Press to switch the input between the home

network and the audio input.

Lights up in green when the audio input is

selected.

This indicator goes off when the unit

connects to your home network (with

either a wireless or wired connection).

H AUDIO IN terminal

Use to connect the audio output jack of an

external component.

(LAN) port

Use to connect the network (LAN) cable.

J VOLUME+/– buttons

Use to adjust the volume. The illumination

indicator flashes when the volume level is

set to either minimum or maximum.

K Power switch

Slide the switch to turn the power on or off.

Note

You cannot operate this unit via a home network

when the power switch is set to OFF. Set the unit

to the network standby mode when you want to

operate the unit via a home network. Refer to

"To set the network standby mode" (page 13).

L DC IN terminal

Use to connect the supplied AC adaptor

(page 12).