Sony SA-NS400 Kullanım Talimatları Kılavuzu - Sayfa 25

Stereo sistemi Sony SA-NS400 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony SA-NS400 40 sayfaları. Wireless network speakers
Ayrıca Sony SA-NS400 için: Talimat ve Kullanım Kılavuzu (14 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Teknik Özellikler (4 sayfalar), Sınırlı Garanti (1 sayfalar), Hızlı Kurulum (2 sayfalar), Özellikler (2 sayfalar), Kullanım Talimatları Kılavuzu (45 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sony SA-NS400 Kullanım Talimatları Kılavuzu
Enjoying Sony Multiple-Room
Products
Using the PARTY
STREAMING Function
You can play back audio content that is being
played back on this unit or on another device
that has a PARTY STREAMING function at
the same time, via your home network.
While using the PARTY STREAMING
function, the device that starts a PARTY and
streams the audio content is called the
"PARTY host," and the device that joins a
PARTY and plays the audio content streamed
from the PARTY host is called a "PARTY
guest."
You can enjoy the PARTY STREAMING
function with other devices that have this
PARTY STREAMING logo.
PARTY STREAMING in a
wireless LAN environment
With some IEEE802.11n-compatible wireless
LAN routers/access points, the wireless LAN
transfer speed may slow down when "WEP"
or "WPA/WPA2-PSK (TKIP)" is selected for
the security method.
If the sound skips during streaming playback
using the PARTY STREAMING function, try
changing the security method to "WPA/
WPA2-PSK (AES)." This may improve the
transfer speed and the streaming playback.
Configurations of encryption (security) vary
depending on the model; please refer to the
operating instructions supplied with your
router/access point.
You can also obtain support information about
wireless LAN settings on the following
website.
http://www.sony.net/audio/netsettings

Starting a PARTY

You can start a PARTY so that other devices
which support the PARTY STREAMING
function can play the same music even though
they are in different rooms.
1
Make sure the PARTY guest
devices are turned on and are
in a status which allows them to
join a PARTY.
2
Play back audio content using
the AUDIO IN terminal or audio
content stored on the server on
your network on this unit.
3
Press and hold PARTY for a few
seconds.
The unit starts PARTY STREAMING
and the PARTY STREAMING indicator
lights up in green.
To close a PARTY
Press and hold PARTY for a few seconds.
The PARTY STREAMING indicator goes off.
Notes
• An error has occurred when the PARTY
STREAMING indicator lights up in red. Perform
the process from step 1 again.
• You cannot start a PARTY while you are currently
participating in a PARTY.
• The . and > buttons may not work,
depending on the server or audio content.
• If the PARTY button is pressed on another device
that complies with the PARTY STREAMING
25
GB