Sony SA-PSD5 Kullanım Kılavuzu - Sayfa 7

Stereo sistemi Sony SA-PSD5 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Sony SA-PSD5 40 sayfaları. 5.1ch digital audio system

Sayfayı Yazdır
Sony SA-PSD5 Kullanım Kılavuzu

Speaker Setup

Positioning the speakers
For the best possible surround sound, all the speakers
other than the subwoofer should be the same distance
from the listening position.
Place the front speakers within 1 to 15 meters (3 to 50 feet)
from the listening position (A).
You can place the center speaker up to 1.6 meters (5 feet)
closer (B) and the rear speakers up to 4.6 meters (15 feet)
closer (C) to the listening position than the front
speakers.
Place the rear speakers either behind you or to the side,
depending on the shape of your room, etc.
You can place the subwoofer at any position.
When the rear speakers are placed to the side
A
C
When the rear speakers are placed behind you
A
C
Note
Do not place the center and rear speakers farther away from the
listening position than the front speakers.
B
A
45°
C
90°
20°
B
A
45°
C
90°
20°
Specifying the speaker parameters
For the best possible surround sound, specify the
following parameters:
• Use the subwoofer or not
• Distance of the speakers from your listening position
• Position of the rear speakers
This system will reproduce the best possible surround
sound by automatically adjusting the output from each
speaker according to the speaker's position.
Details of each parameter will follow the description of
the operation.
SHIFT
1
Press ?/1 (POWER) to turn on the system.
2
While pressing SHIFT, press SOUND FIELD (SPEAKER
SETUP).
Each time you press SOUND FIELD (SPEAKER
SETUP), the parameter is selected and displayed in the
following order. See the next page for details of each
parameter.
<< SETUP >> (Setup mode) T
r
SLEEP OFF (Sleep timer setting mode,
page 14)
r
S. W.
r
F.DIST.
r
C.DIST.
r
R.DIST.
r
R.PL.
r
R.HGT.
3
While pressing SHIFT, set the parameter using
VOLUME +/–.
4
Repeat Steps 2 and 3 to set other parameters.
If you do not operate the remote for a few seconds, the
parameter turns off and is stored in the system.
?/1 (POWER)
SOUND FIELD
(SPEAKER SETUP)
VOLUME +/–
continued .
7
US