Sony SS-H771 Kullanım Talimatları Kılavuzu - Sayfa 17
Stereo sistemi Sony SS-H771 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony SS-H771 32 sayfaları. Micro & mini shelf systems: mini hi-fi component system
continued
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press § OPEN/CLOSE and place a CD.
Then, press § OPEN/CLOSE again to
close the disc tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP EX-CHANGE
repeatedly so that it lights green.
3
Press EDIT.
"TAPE SELECT" appears and the player
divides the selections automatically.
Then the display changes as follows:
CD
1 2 3 4 5
6 7 8
63
125
ALL
DISC S
CLIP
Tape length required
CD
1 2 3 4 5
6 7 8
63
125
250 500
1k
2k
4k
ALL
DISC S
CLIP
4
Insert a blank tape of the indicated
EN
length (or longer) into deck B.
5
Select dual or single-sided recording.
To record
One side of the tape
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
6
Press CD SYNCHRO.
Deck B stands by for recording.
7
Press ∏ PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
Recording a CD:
Specifying Tape
Length (time edit)
You can have the stereo system create
programs based on the tape length. The CD
player makes programs that will fit the tape
length. For example, if you use a 40-minute
tape to record a 46-minute CD, the CD
player will automatically choose tracks that
will fit within the 40-minutes, filling as
much of the tape as possible. The player
will not program those tracks beyond track
16
Chapter 4: the Tape Player
number 20. Use the buttons on both the
unit and the remote to do this operation.
POWER n ON
8
VOLUME
DOLBY NR OFF
VOLUME
DOLBY NR OFF
8k
16k(Hz)
CHECK
Press DIRECTION to
1
Press FUNCTION repeatedly until "CD"
select
appears in the display.
A
2
ß or RELAY
Press § OPEN/CLOSE and place a CD.
Then, press § OPEN/CLOSE again to
close the disc tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP EX-CHANGE
repeatedly so that it lights green.
3
Press EDIT twice.
"TIME EDIT" appears in the display.
Then "SELECT" and "TIME" appear
alternately in the display.
4
Turn the JOG dial (or press
on the remote) to designate the tape
length.
Choose the indication for tapes of a
corresponding minute length. Choose
"HALF" if you want the CD player to
play just half the total playing time of
the CD without changing the order of
the track.
As you turn the JOG dial or press the
changes as follows:
CLIP
DISC SKIP EX-CHANGE
2
π
PLAY MODE
3,5,
6
4
1
9
10
7
DOLBY NR
π
10
4
3,5,
6
1
2
or
or
on the remote, the indication
(23:00)
(27:00)
(45:00)
(37:00)
(30:00)
CD
1 2 3 4 5
VOLUME
6 7 8 9 10
DOLBY NR OFF
11
63
125
250 500
1k
2k
4k
8k
16k(Hz)
DISC PROGRAM
Note
You cannot select "HALF" when you
want to record CD which has more than
20 tracks.
5
Press EDIT.
The CD player determines the tracks to
be recorded on side A automatically.
Tracks to be recorded on side A
CD
1 2 3 4 5
6
DOLBY NR OFF
63
125
250 500
1k
2k
4k
8k
16k(Hz)
DISC PROGRAM
CLIP
Total playing time on side A
6
When you want to record on both sides,
press EDIT again.
The CD player determines the tracks to
be recorded on side B.
When you want to record only on side
A, press π on the CD player to stop the
indication from flashing.
7
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
8
Select dual or single-sided recording.
To record
Press DIRECTION to
select
One side of the tape
A
Both sides*
ß or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
9
Press CD SYNCHRO.
Deck B stands by for recording.
10
Press ∏ PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press π on deck or the CD player.
To check the order
Press CHECK on the remote repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel time edit
Press π on the CD player and then press
PLAY MODE.
VOLUME