Sony SS-WG60 Kullanım Talimatları Kılavuzu - Sayfa 18
Stereo sistemi Sony SS-WG60 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony SS-WG60 41 sayfaları.
Sayfayı YazdırP
You can preset up
to 20 stations
for PM and 10
stations for AM.
1
Press TUNER/BAND repeatedly
to
select "FM" or "AM"
2 Press and hold 44 or W until the
frequency Indication
starts to change,
then release it.
Scanning stops automatrcally when the
system tunes m a station. "TUNED"
and
"STEREO" (for a stereo program) appear.
3 Press MENU.
4
Press - W
or HI
+ (or i44 or W
on the remote) repeatedly
until
"MEMORY" appears, then press
ENTER.
A preset number appears.
Preset number
5
Press - I44 or W
+ (or t44 or HI
on the remote) repeatedly
to select the
dewed
preset number.
6
Press ENTER.
"COMPLETE"
appears.
The station 1s stored.
7 Repeat steps 1 to 6 to store other
stations.
To tune
in a station
with
a weak
signal
Press ti
or w
repeatedly m step 2 to tune m
the statron manually
To
set
another
station
to an existing
preset
number
Start over from step 1. After step 4, press
- w
or w
+ repeatedly to select the preset
number you want to store the other station.
To
change
the
AM
tuning
interval
The AM tuning Interval 1s factory-set to 9 kHz
(10 kHz m some areas). To change the AM
tuning interval, tune m any AM station first,
then turn off the system. While holding down
ENTER, turn the system back on. When you
change the interval, all the AM preset stations
are erased. To reset the Interval, repeat the
same procedure.
Tip
The
preset stattons are
retamed for half a day even if
you unplug the power cord or if a power failure
occurs.
18