Sony STR-DA5800ES Etkinleştirme Kılavuzu - Sayfa 2
Stereo sistemi Sony STR-DA5800ES için çevrimiçi göz atın veya pdf Etkinleştirme Kılavuzu indirin. Sony STR-DA5800ES 7 sayfaları. Control4 automation
Ayrıca Sony STR-DA5800ES için: Sınırlı Garanti (1 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Sony®
STR-DA2800ES/
DA5800ES Receiver
Control4® Automation
Activation Guide
Sony STR Receiver without Full Automation
Activated, Controlled by a Control4 Controller
(ZSO-STRDA2800ES or ZSO-STRDA5800ES):
• Control4 Composer Pro software (OS 2.2.4 or
later).
• Use the Online Database in Composer Pro to add
the receiver's certified driver to the project.
• Follow the instructions in the Composer Pro User
Guide to identify the receiver into the Control4
project.
Box Contents
Carefully unpack the contents from the box and make
sure you have the items in this list:
• Sony STR receiver (DA2800ES or DA5800ES)
• Remote Control
• Power Cord
• USB ZigBee Wireless Adapter (UWA-C4Z,
'ZigBee dongle')
• Speaker Calibration Measurement Mic
• Loop Antenna (DA5800ES only)
• Connector (F Type)
• Batteries (R6)
• Second Zone Remote Control
• Owner Registration Card
• Warranty Card
• Instruction Manual
• Installation Guide
• Software License Information
If any of these items is missing or damaged, please
contact Sony immediately. If you have any problems
with Control4 automation, contact Control4 Technical
Support.
2
™
HDMI Zones
The Sony STR receiver provides multiple HDMI zones:
HDMI A and HDMI B.
Zone 1
HDMI output. Component Video over CAT5e
Zone 2
with the use of a balun is supported on the
STR-DA5800ES only.
Zone 3
No video output supported; only audio.
(STR-DA5800ES
only)
Sony's Out-of-the-Box Automation
The Sony 'Easy Setup' wizard that displays on the TV
by default when you power on the receiver the first
time lets you select a display driver as well as various
AV equipment drivers (DVD, Blu-ray, Cable box,
satellite, etc.). Additionally, you can add Control4
Wireless Outlet Dimmers and Switches to the system.
The basic automation available out of the box is
controlled using the Sony IR remote and through
the Sony UI (no Control4 On-Screen Navigator or
Control4 remote compatibility is available out of the
box).
Likewise, the out-of-the-box automation can only
be configured using Sony's Easy Setup wizard;
Composer Pro configuration and programming is not
available without a Control4 Activation License.
If you plan to activate full Control4 home automation,
then skip the Easy Setup wizard. After you select
your language and accept the End User License
Agreement and start the Easy Setup Wizard, then
immediately select Finish to skip the Easy Setup
wizard. This will take you to the Sony Home screen.
Install the Receiver
First, follow the instructions in the Sony
documentation to install the Sony STR receiver
(general steps below), and then follow the
instructions in "Control4 Activation Instructions."
In general:
1
Install the speakers.
2
Connect a TV to the receiver.
3
Install the receiver.