5
Press @.
6
The station is stored as the selected preset
number.
Repeat steps 1 to 5 to store
another station.
2
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT
SELECTOR
on
the receiver.
Press PRESET + or PRESET-
repeatedly to select the station.
Each time you press the button,
you can
select a preset station as follows:
-_1
_-_2
_
3 _-_4
4-+ 5 4-+...4-+27_]
_30---*29----_28
_-
You can also press the numeric
buttons
to
enter the preset station.
To tune to the
selection,
press @.
Using the control
buttons
on
the receiver
1 Turn INPUT
SELECTOR
to select the FM
or AM band.
2 Press TUNING
MODE
repeatedly
to select
"PRESET".
3 Press TUNING
+ or TUNING
- to select the
preset station you want.
2
3
4
5
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT
SELECTOR
on
the receiver.
Tune to the preset station you
want to create an index name
for (page 25).
Press AMP MENU.
Press _/t repeatedly to select
"NAME IN", then press @ or ..
The cursor
flashes
and you can enter a
character.
Press _/t to select a character,
then press ./.
to move the
input position backward and
forward.
You can enter up to 8 characters
to name
the station.
Tips
•You can select the character type as follows
by pressing t/l!,.
Alphabet (upper case) ---+Numbers ---+
Symbols
•To enter a blank space, press ,I_without
selecting a character.
If you made
a mistake
Press _./.1_until the character
you want to
change flashes,
then press e/!r, to select
the correct
character.
6
Press @.
The name you entered is registered.
Note (Europe
model
only)
When you name an RDS (Radio Data System)
station and tune to that station, the Program Service
name appears instead of the name you entered.
¢D
O
"O
¢D
o
:3
25_B
Sayfayı Yazdır