[AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE]
(US, Canadian model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
1. While pressing the [TUNING MODE] button, press the
[
] button to turn on the main power.
?/1
2. The message "9K STEP" or "10K STEP" appears for a
moment
and the channel step is changed.
[SOFTWARE VERSION DISPLAY MODE]
* The software version is displayed.
* Procedure:
1. While pressing the [SPEAKERS (OFF/A/B/A+B)] and the
[MUTING] buttons simultaneously, press the [
turn on the main power.
2. The destination and the software version are displayed.
Destination
D1
D2
UNKNOWN
U
N
U2
U
2
CA2
C
A
CEL
C
E
[KEY CHECK MODE]
* Button check
* Procedure:
1. While pressing the [SPEAKERS (OFF/A/B/A+B)] and the
[DIMMER] buttons simultaneously, press the [
turn on the main power.
2. The message "REST 13" appears.
3. Every press of any button other than the [
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed "REST 00"
appears.
[VACUUM FLUORESCENT DISPLAY TEST MODE]
* All fl uorescent segments are tested. When this test is activated,
all segments light on at the same time, then each segment lights
on one after another.
* Procedure:
While pressing the [SPEAKER (OFF/A/B/A+B)] and the
[DISPLAY] buttons simultaneously, press the [
turn on the main power.
1. ALL segments light on.
SP A
OPT
HDMI
DTS
-ES
SW
LFE
COAX S-AIR
SP B
L
C
R
SL
S
SR
SBL SB SBR
2. Turn the [INPUT SELECTOR] control, confi rm display.
-ES
LFE
COAX S-AIR
SP B
L
R
S
All manuals and user guides at all-guides.com
SECTION 2
TEST MODE
] button to
?/1
D3
VERSION
K
1.
0
5
A
2
2.
0
5
A
L
3.
0
5
A
] button to
?/1
] counts down
?/1
] button to
?/1
96/24
CAT
MEMORY
RDS
ZONE 2
PL
II
x
ST
D
EX
NEO:6
SAT
D.RANGE
MONO SLEEP
dB
k
Hz
m
ft.
MHz
MEMORY
ZONE 2
PL
x
ST
EX
NEO:6
SAT
k
ft.
MHz
3. Turn the [INPUT SELECTOR] control, confi rm display.
SP A
OPT
HDMI
DTS
SW
C
SL
SR
SBL SB SBR
4. Turn the [INPUT SELECTOR] control, all segments light off.
[HISTORY MODE]
* The state that the set is used is memorized.
* Procedure:
1. While pressing the [TREBLE +] and [SPEAKERS (OFF/A/
B/A+B)] buttons, press the [
?/1
and "HISTORY" is displayed.
2. Each time the [ ]/[ ] buttons on the remote commander is
pressed, the item is switched in order as follows.
Item
History
Count how many time of
protector happen
Total single power on time
Input function
HP ON/OFF
Volume
Bass
Treble
Balance
Total power on time
Muting
Power on counter
(Rebox Test Mode)
Protector Type
VACS step
Return to history
[PROTECTOR AUTO OFF]
* To disable auto off after protector occur
* Procedure:
1. While pressing the [TREBLE -] and [SPEAKERS (OFF/A/B/
A+B)] buttons, press the [
?/1
power.
2. "PROT OFF" appears and switch off the set.
[SHIPMENT MODE]
* All preset contents are reset to the default setting.
* Procedure:
1. While pressing the [TUNING MODE] and the [MUTING]
buttons simultaneously, press the [
main power.
2. "CLEARING" and "CLEARED" appear and switch off the
set.
STR-DH130
96/24
CAT
RDS
II
D
D.RANGE
MONO SLEEP
dB
Hz
m
] button to turn on the power
Display
HISTORY
COUNT xx
xxxxxHxx01
FUNCTION
HP xxx
VOL xxx
BASS xxx
TREB xxx
F xxx
xxxxxHxx02
MUTE xxx
REBXxxxx
PROTxxxx
VACS xx
HISTORY
] button to turn on the main
] button to turn on the
?/1
7
Sayfayı Yazdır