Sony TDM-BT1 - Digital Media Port Bluetooth Interface Kullanım Talimatları Kılavuzu - Sayfa 8

Stereo sistemi Sony TDM-BT1 - Digital Media Port Bluetooth Interface için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Sony TDM-BT1 - Digital Media Port Bluetooth Interface 44 sayfaları. For connectivity to bluetooth devices
Ayrıca Sony TDM-BT1 - Digital Media Port Bluetooth Interface için: Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

Sony TDM-BT1 - Digital Media Port Bluetooth Interface Kullanım Talimatları Kılavuzu

Press and hold the OPR button for 3 seconds or more.

The LED status indicator starts flashing very quickly and this unit

enters pairing mode.

Note

Pairing mode is canceled automatically if pairing is not achieved within 5

minutes, or manually by pressing the OPR button. If pairing mode is canceled

midway, start over from step 1.

Perform pairing procedure on the BLUETOOTH stereo

audio source device to detect this unit.

The list of detected devices appears on the display of the

BLUETOOTH stereo audio source device.

This unit is displayed as "TDM-BT1."

If "TDM-BT1" is not displayed, repeat from step 1.

Notes

• When pairing, be sure to place both the BLUETOOTH devices within 1 m

(about 3 ft) of each other.

• Some devices cannot display the list of detected devices.

• To operate the BLUETOOTH stereo audio source device, refer to the

operation instructions of the device.

Select "TDM-BT1" on the display of the BLUETOOTH

stereo audio source device.

If Passcode* input is required on the BLUETOOTH

stereo audio source device, input "0000".

When BLUETOOTH pairing is complete, the LED status indicator

flashes slowly and pairing information is memorized on this unit.

* Passcode may be called "Passkey," "PIN code," "PIN number," or

"Password."

Notes

• Some BLUETOOTH stereo audio source devices may connect with the

unit automatically when pairing is completed. For other devices, you will

have to connect to this device manually.

• If you disconnect this unit or the BLUETOOTH stereo audio source device,

before a connection is complete, pairing information is not memorized, and

pairing will not be completed.