Sony ZS-PS30CP Servis Kılavuzu - Sayfa 9
Stereo sistemi Sony ZS-PS30CP için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Sony ZS-PS30CP 48 sayfaları. Personal audio system
Ayrıca Sony ZS-PS30CP için: Kullanım Talimatları (2 sayfalar), Kullanım Talimatları Kılavuzu (2 sayfalar)
Sayfayı Yazdır
2-6.
MAIN BOARD BLOCK
Note 1: Before disconnecting the fl exible fl at cable (16 core) of optical pick-up block, solder the short-land.
1 tapping screw
(PWH B2.6)
2 Remove ferrite core
from rib.
4 four tapping screws
(BV B2.6)
3 connector
(S801)
5 Remove the MAIN board block
in the direction of an arrow.
ire settin
OK
Wire is below a screw hole. Wire is above a screw hole.
ferrite core
tape
4 tapping screw
(BV B2.6)
8 flexible flat cable (6 core)
– Cabinet (upper) block bottom side view –
NG
ferrite core
9 MAIN board block
4 two tapping screws
(BV B2.6)
7 flexible flat cable (16 core)
Note 2: When assembling the MAIN
cabinet (upper)
Note 3: When installing the flexible
Insert is straight to the interior.
tape
MAIN board
front side
ZS-PS30CP
6 Solder the short-land.
board block, remove the
solder of short-land after
connecting the flexible flat
cable (16 core).
flat cable, ensure the coloured
line.
No slanting after insertion.
OK
flexible flat
cable
coloured line
connector
NG
Insert is incline
flexible flat
cable
coloured line
connector
9