Digitimer D188 Operatör El Kitabı - Sayfa 15
Laboratuvar Ekipmanları Digitimer D188 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Digitimer D188 20 sayfaları. Remote electrode selector
Sayfayı YazdırDigitimer Ltd – D188 Operator's Manual
Version 1.2
Section 4
System Operation
Introduction
Once the operator is familiar with the D188 hardware and understands how the control software is
operated, the next step is connection of the D188 to the source of stimulation, the stimulation electrodes
and the digital trigger source. A schematic of a typical setup is given below.
The diagram above illustrates how a single PC and compatible DAQ hardware/software can be used to
control the stimulation parameters of a Digitimer stimulator and direct electrical stimuli to one of up to
eight pairs of electrodes, one pair at a time.
15