Cisco ASR 9000 Series Ağ Ayarlarını Yapılandırma - Sayfa 15

Ağ Donanımı Cisco ASR 9000 Series için çevrimiçi göz atın veya pdf Ağ Ayarlarını Yapılandırma indirin. Cisco ASR 9000 Series 26 sayfaları. Line card
Ayrıca Cisco ASR 9000 Series için: Yapılandırma Kılavuzu (46 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Manuel (24 sayfalar), Yapılandırma (46 sayfalar), Manuel (44 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar)

Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router

Plug and Play Satellite nV Switch Turn up: (Rack, Plug, and Go installation)

Note

Connect the 10GigE fibers from Cisco ASR 9000 Series Router to any of the 10G SFP+ ports on the

Cisco ASR 9000v in any order.

Note

If the satellite software requires an upgrade, it notifies the host Cisco ASR 9000 Series Router. You can

do an inband software upgrade from the Cisco ASR 9000 Series Router, if needed. Use the

show nv satellite status on host Cisco ASR 9000 Series Router to check the status.

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide

OL-26061-03

Unpack the Cisco ASR 9000v rack, stack, and connect to the power cord.

Plug in Cisco ASR 9000v qualified optics of correct type into any one or more of the SFP+ slots and

appropriate qualified optics into SFP+ or XFP slots on the host Cisco ASR 9000 Series Router.

Connect through the SMF/MMF fiber.

Configure the satellite nV system through CLI or XML on the Cisco ASR 9000 Series Router host

10GigE ports. Configure the host for nV operations as described in the sections

Satellite nV

System,

Configuring the host IP

Connectivity.

Power up the Cisco ASR 9000v chassis.

You can check the status of Cisco ASR 9000v chassis based on these chassis error LEDs on the front

face plate.

If the Critical Error LED turns ON, then it indicates a serious hardware failure.

–

If the Major Error LED turns ON, then it indicates that the hardware is functioning well but

–

unable to connect to the host.

If the Critical and Major LEDs are OFF, then the Cisco ASR 9000v is up and running and

–

connected to the host.

–

You can do satellite ethernet port packet loopback tests through the host, if needed, to check end

to end data path.

Implementing a Satellite nV System

address, and

Configuring the Inter-Chassis Links and

Defining the

HC-721