Cisco ASR 9000 Series Manuel - Sayfa 21

Ağ Donanımı Cisco ASR 9000 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco ASR 9000 Series 24 sayfaları. Line card
Ayrıca Cisco ASR 9000 Series için: Ağ Ayarlarını Yapılandırma (26 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Yapılandırma Kılavuzu (50 sayfalar), Yapılandırma (46 sayfalar), Manuel (44 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar)

Sayfayı Yazdır
Cisco ASR 9000 Series Manuel
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers switch ports

To display status on a switch port, use the show controllers switch ports command in EXEC mode.
show controllers switch {0| 1} ports
Syntax Description
{0 | 1}
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples
The following example shows the output from the show controllers switch ports command, which displays
status about switch controller ports on switch 0:
RP/0/RSP0/CPU0:router# show controllers switch 0 ports
Ports Active on Switch 0
FE Port
FE Port
FE Port 10
GE Port
Table 9: show controllers switch ports Field Descriptions
Field
Ports Active
FE Port
GE Port
STP State
Connected to
OL-24762-01
2
STP State : FORWARDING
9
STP State : FORWARDING
STP State : FORWARDING
2
STP State : FORWARDING
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
Instance of the controller.
Modification
This command was introduced.
(Connected to - 0/RP1)
(Connected to - 0/SM0)
(Connected to - 0/SM1)
Description
Indicates the active switch ports on the controller.
Identifies the FE port.
Identifies the GE port.
The state of the Spanning-Tree Protocol:
FORWARDING or DISABLED.
The node that owns the specified port.
show controllers switch ports
21