Cisco ASR 9922 Manuel - Sayfa 7
Ağ Donanımı Cisco ASR 9922 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco ASR 9922 44 sayfaları. Replacing cisco asr 9000 series router components
Sayfayı Yazdır- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Replacing Cisco ASR 9000 Series Router Components
Figure 4: Replacing the Cisco ASR 9904 Router Chassis Air Filter
1
Step 2
For the Cisco ASR 9922 Router and Cisco ASR 9912 Router, remove the three air filters by pulling them off
the front of the chassis (Cisco ASR 9922 Router Chassis Air Filters) and (Cisco ASR 9912 Router Chassis
Air Filter ). Then, for each filter, loosen the thumb screws, rotate the inner frame out, and replace the foam
media (Removing the Cisco ASR 9922 Router Chassis Center Air Filter—Version 1 and Removing the Cisco
ASR 9922 Router Chassis Side Air Filter —Versions 1 and 2).
Note
Figure 5: Cisco ASR 9922 Router Chassis Air Filters
Air filter
In the Cisco ASR 9922 Router (version 2 air filter) the center air filter, shown in Cisco ASR 9922
Router Chassis Center Air Filter—Version 2, does not contain replaceable foam media. The left
and right air filters are the same as version 1 and contain replaceable foam media.
2
Replacing Cisco ASR 9000 Series Router Components
Replacing the Chassis Air Filter
Thumb screw
7