Cisco C1101-4PLTEPWx Kurulum ve Bağlantı - Sayfa 26
Ağ Donanımı Cisco C1101-4PLTEPWx için çevrimiçi göz atın veya pdf Kurulum ve Bağlantı indirin. Cisco C1101-4PLTEPWx 27 sayfaları. This chapter describes how to install and connect cisco 1000 series integrated services router (isr) to lan and wan networks.
Sayfayı Yazdır
Connection Procedures and Precautions
1
Connection Procedures and Precautions
After you have installed the router chassis, perform these steps to connect the WAN and LAN interfaces:
• Connect each WAN and LAN to the appropriate connector on the chassis.
• Position the cables carefully so that you do not strain the connectors.
• Organize cables in bundles so that cables do not intertwine.
• Inspect the cables to make sure that the routing and bend radius is satisfactory. If necessary, reposition
• Install cable ties in accordance with site requirements.
Configure the Router at Startup
After installing the router and connecting the cables, you can configure the router with basic configurations.
For more information on how to configure the router, see the
Install and Connect the Router
26
Cable color codes are specific to Cisco cables.
the cables.
Install and Connect the Router
Cisco 1100 Series Software Configuration
Guide.