Argo XP5 Kullanım Kılavuzu - Sayfa 12

Ciltleme Makinesi Argo XP5 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Argo XP5 18 sayfaları. Electric binding machine 2 in 1

Sayfayı Yazdır
Wire closing channel
Micro adjustment knob
Wire closure control
NOTE!
Assemble the punching handle upright with the provided Allen wrench and Allen screw.
Set the punching switch with the punching handle at full upright position. Insert paper for
punching only after you finish setting up the punching switch.
OPERATION GUIDE
Place the machine on a stable and safe place before using.
CONTROL PANEL - INDICATORS
Waste paper full tray
– empty the waste paper tray
Waste paper wrong tray input
– insert the waste paper tray properly
Repair
– paper jam or other mulfunction has occured,
contact the authorized service
Power
– power connection
PUNCH button
– press the button to punch the paper

FOOT PEDAL

1.
Binding machine is equipped with an optional foot pedal which allowes to punch the
paper.
2.
Connect the foot pedal cord with the machine.
3.
Plug the cord into an appropriate socket at the back of the machine which is situated
next to the main switch.
4.
After connecting the foot pedal with the machine you can use both: foot pedal and
PUNCH button to punch the paper.
© ARGO S.A.
EN
12
Waste tray
Allen screw
Allen wrench
www.argo.pl