DIGITIZE System 3505 Kurulum ve Kullanım Kılavuzu - Sayfa 12
Sunucu DIGITIZE System 3505 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. DIGITIZE System 3505 20 sayfaları. Remote alarm terminal option
Ayrıca DIGITIZE System 3505 için: Kullanım Kılavuzu (12 sayfalar)
Sayfayı YazdırOnce the password is entered, and the SET key is pressed, you will see the BT selection
menu. Enter the desired BT-2 number (BT #2 is shown above). If the BT exists, then
the BT-2 Status will either be displayed as ACTIVE or DISABLED. To disable a BT-2
(presumably for a long period of time) move the cursor by pressing the FUNC key until it
is under the word ACTIVE. Simply press the ON or OFF key on the SYSTEM 3505 to
change the status to DISABLED. No information is sent to the Monaco box. The
disabling process of the BT-2 does not apply for activation of a BT-2, or for adding a new
BT-2. In the case of adding a new BT-2 the BT-2 status will be noted as NONE.
To ADD or CHANGE the configuration of a BT-2 unit you must first enter the desired
BT-2 number into the 3 6 SET menu. Move the cursor by pressing the FUNC key and
enable of disable the desired zones by using the ON/OFF keys when the cursor is at the
location of the desired zone. A display of the actual zone number indicates that the zone
will be active when you activate the desired BT-2. An X or XX indicates that the
selected zone will be disabled, when you activate the desired zone. Once you make all
the selections, press the "Activate selection now" soft key. If the selected BT is on line,
the printer the following information:
If the BT-2 is not on line, then only the request will be printed.
DIGITIZE, INC. 700270 REV A 01/06
1-7
Specifications Subject to Change Without Notice