Cisco Catalyst 7500 Series Manuelin Değiştirilmesi - Sayfa 18
Ağ Donanımı Cisco Catalyst 7500 Series için çevrimiçi göz atın veya pdf Manuelin Değiştirilmesi indirin. Cisco Catalyst 7500 Series 40 sayfaları. Chassis interface board
Ayrıca Cisco Catalyst 7500 Series için: Veri Sayfası (11 sayfalar), Sorun Giderme Kılavuzu (11 sayfalar), Yapılandırma Kılavuzu (50 sayfalar)
Sayfayı Yazdır
Replacing the CI in the Cisco 7507
Removing and Replacing the CI
The CI (shown in Figure 7) is a printed circuit board mounted to the noninterface processor side of
the backplane. On the back (backplane side) of the chassis is a connector into which the CI plugs
directly into the backplane.
Figure 11
Standoff
screw holes
Note
front chassis panels. If not, refer to the appropriate procedures in this section to remove these items.
18 Replacing the Chassis Interface (CI) Board in the Cisco 7500 Series Chassis
Chassis Interface (MAS-7500CI=)
Chassis interface
Replace the CI only if it fails. This procedure assumes that you have already removed the
Standoff
screw holes