Cisco Catalyst 8510 Kurulum Kılavuzu - Sayfa 14

Ağ Donanımı Cisco Catalyst 8510 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco Catalyst 8510 19 sayfaları. Installing and grounding the chassis
Ayrıca Cisco Catalyst 8510 için: Hızlı Referans (8 sayfalar)

Sayfayı Yazdır
Specifications and Regulatory Compliance Information
Description
Specifications
Switch and processor
10-Gbps shared memory, nonblocking switch fabric up to 32-KB
capacity
frames
Dimensions (H x W x D)
Chassis: 10.4 x 17.25 x 18.4 in (26.4 x 43.8 x 46.7 cm)
Processor, switch processor, carrier module, and interface module:
1.2 x 14.4 x 16 in (3.0 x 36.6 x 40.6 cm)
Port adapter: 1.2 x 6.5 x 10 in (3.0 x 16.5 x 25.4 cm)
Power supply: 2.7 x 6.0 x 15.3 in (6.9 x 15.2 x 38.9 cm)
Weight
Empty chassis: 32 lb (14.51 kg)
Fully populated chassis: approximately 130 lb (58.97 kg)
AC power supply: 11 lb (4.99 kg)
DC power supply: 10 lb (4.54 kg)
Airflow
95 cfm through the system fan assembly
Operating temperature
32 to 122 F (0 to 50 C)
–
Nonoperating temperature
40 to 167 F (
Humidity
10 to 90%, noncondensing
–
Altitude
500 to 6,500 ft (
Microprocessor
100-Mhz MIPS R4700
AC total output
388W maximum
AC-input voltage
100-127/200-240 VAC wide input with power factor correction
AC frequency
Auto sensing limits: 100 to 127/200 to 240 VAC, 8/4A, 50/60 Hz
AC current rating
8/4A with the chassis fully populated
Power supply load
376W maximum configuration, 200W typical with max configuration
DC voltages supplied and
System:
steady-state maximum
current ratings
Processor:
–
40 to 75 C)
–
152 to 2000 m)
+5V @ 70A
+12V @ 2A
+24V @ 0.12A
+5V @ 15A
+24V @ 25mA
+12V @ 500mA
Description
Specifications
Memory
8-MB Flash memory SIMM (upgradable to 16 MB)
64-MB DRAM
256-KB boot EPROM
128-KB SRAM
No Flash PC card installed by default (accepts 8-, 16-, or 20-MB Intel
Series 2+ Flash PC cards)
Regulatory Compliance
CE Marking (European Union)
UL 1950 (U.S.A.)
CSA C22.2 No. 950 (Canada)
EN60950 (European Union)
IEC60950 (International)
AS/NZS 3260 (Australia/New Zealand)
TS001 (Australia)
21CFR1040 (Laser - U.S.A.)
EN60825 (Laser - European Union)
IEC60825 (Laser - International)
FCC Part 15 (CFR 47) Class A (U.S.A.)
VCCI Class A with UTP and Class B with FTP cables (Japan)
EN55022 Class A with UTP and Class B with FTP cables (European
Union)
CISPR 22 Class A with UTP and Class B with FTP cables
(International)
AS/NZS 3548 Class A with UTP and Class B with FTP cables
(Australia/New Zealand)
EH 55024
EH 50082-1
ET5300 386-2
ICES 003 Class A
1.
Products bear CE Marking indicating compliance with the 99/5/EC directive, which includes the following safety
and EMC standards.
1