Cisco CE 2000 Platform SCE 2000 4xGBE Hızlı Başlangıç Kılavuzu - Sayfa 26

Ağ Donanımı Cisco CE 2000 Platform SCE 2000 4xGBE için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco CE 2000 Platform SCE 2000 4xGBE 29 sayfaları. Service control engine

Sayfayı Yazdır

Table 6

Power Supply LEDs (continued)

LED Label

Power A/B (front panel)

Identifying Startup Issues

Startup issues are commonly due to a powers source issue or a poor cable connection.

This section describes the normal startup sequence and describes the steps to take if the system does not perform that sequence

as expected. LEDs indicate all system states in the startup sequence. By checking the state of the LEDs, you can determine when

and where the system failed in the startup sequence. Use the following descriptions to isolate the problem to a subsystem, and

then proceed to the appropriate sections to try to resolve the problem.

When you start up the system by turning on the power supply switch, the following should occur:

• You should immediately hear the fans operating.

• When all LEDs come on to indicate that the system has booted successfully, the initial system banner should be displayed

on the console screen.

f the banner is displayed, but the Status LED is flashing orange, indicating a warning state, check the user log:

•

At the prompt, enter more user log

If any of the following warning messages appear, turn off the Cisco SCE 2000 platform and call technical support.

Voltage problem

–

Fan problem

–

Abnormal increase in interior temperature

–

• If the following warning message appears, delete unneeded files from the disk.

insufficient disk space

–

Color

State

Function

Green

The output voltage is in the required range (between 11.9 and 12.1 VDC).

Off

The output voltage is not within the required range (greater than 12.1 VDC

or less than 11.9 VDC).

Green

Steady

Corresponding power supply unit is present and functioning normally.

Red

Steady

Corresponding power supply unit present, but malfunctioning.

Off

Corresponding power supply unit is either not present or has failed.