Digitone ProSeries II Call Blocker Kullanım Kılavuzu - Sayfa 13
Telefon Aksesuarları Digitone ProSeries II Call Blocker için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Digitone ProSeries II Call Blocker 17 sayfaları. Automatically blocks and routes screened calls using caller id with back lighted display
Sayfayı Yazdır
Display All Operating Codes
Code 92
Press and hold the Program Button for 3 seconds until you see "Program Mode", then
"Pick Up Phone", when the prompt for "Enter Code" displays, enter 9 2 to see the
current settings. The factory default list is Pg1: 16, 28, 30, 46, 48, 58, Pg2: 70,
73, 75, 77, 80, 85, Pg3: 87, 91, 96, 66, 03. These codes can change when the
user enables alternate settings.
VoIP Option
Code 95
- Manually Set Clock and Date
The date and time are determined by your local phone service automatically, but you
can manually set it for use with VoIP phone services. Press and hold the Program
Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the
prompt for "Enter Code" displays, enter 95 followed by the year in two digits, the
month in two digits, the day in two digits and the (Military) time in 4 digits.
Example, 95 20 05 28 1425 * or 95 + Year 20 + Month 05 + Day 28 + Mil Time 1425
(2:25PM) + * key to store. The display will show the new Time and Date changed
immediately after you hang up and for each call thereafter. To return to factory setting
of Automatic Date & Time from your phone company, enter 95 # *.
Global Invite Code
Code 96#*
Invites all callers who display a valid phone
number.
You can invite all callers who display a phone number and yet block a single number or
area code. This one command will allow all Invited callers who display a phone number
to ring through to the TEL phone port and all other devices connected directly to the
phone line. To do this, enter programming with the Program Button. Press and hold
the Program Button for 3 seconds until you see "Program Mode", then "Pick Up
Phone", when the prompt for "Enter Code" displays enter 96 # *, display shows
function. All callers in this list are considered Invited, but not VIP callers who are in a
separate list.
Global Block Method Code 97#*
If you want to block all callers and invite only specific numbers, you can use Code 97
# * to disable the default Global Invited List and create your own invited call list. To
enable this feature, press and hold the Program Button for 3 seconds until you see
"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 97 #*, display shows function. NOTE: that when Code 97 #* is stored, all calls
will be Blocked, answered and hungup on until you add Invited numbers.
Reset DPCB Call List Settings Code 98#*
Entire Caller List Deletion WARNING: This will delete all numbers from all lists!
To delete ALL numbers stored, enter programming: press and hold the Program
Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the
prompt for "Enter Code" displays, enter 98 # *, display shows: "ALL NBR DELETED".
All numbers stored from all lists will be cleared.
Reset DPCB User Settings Code 99#*
To reset the DPCB user settings to factory settings but not delete any call lists, Press
and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick
Up Phone", when the prompt for "Enter Code" displays, enter 99 # *.
12