Digitone proseries blocker Kullanım Kılavuzu - Sayfa 13
Cep Telefonu Digitone proseries blocker için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Digitone proseries blocker 17 sayfaları. Automatically blocks and routes screened calls with caller id
Sayfayı Yazdır
Operating Codes Continued
22. Code 49 NAME BLK PRV OFF Private Name Block Disabled (Default)
23. Code 50 NBR INVITE SAVED
24. Code 51 NBR INVITED LIST Stored Invited list displayed
25. Code 52 B/AREA PAS SAVED
26. Code 53 B/AREA PASS LIST Stored Invited list displayed
27. Code 58 NAME BLK OOA ON Out of Area Name Block Enabled
28. Code 59 NAME BLK OOA OFF Out of Area Name Block Disabled (Default)
29. Code 60 NBR VIP SAVED
30. Code 61 NBR VIP LIST Stored VIP number list displayed
31. Code 70 SKIP 1ST RING (Default)
32. Code 71 PASS 1ST RING
33. Code 72 OPX CALL allowed on Line
34. Code 73 OPX CALL HANG UP (Default)
35. Code 74 PRIVATE ENABLED
36. Code 75 PRIVATE DISABLED (Default)
37. Code 76 OUT OF AREA -ON
38. Code 77 OUT OF AREA -OFF (Default)
39. Code 78 PBX ENABLED
40. Code 80 AFTER HOUR M OFF (Default)
41. Code 81 AFTER HOURS M ON
42. Code 82 ENTER START TIME
43. Code 83 ENTER END TIME
44. Code 84 SET MON-FRI ON
45. Code 85 SET MON-FRI OFF (Default)
46. Code 86 SET SAT-SUN ON
47. Code 87 SET SAT-SUN OFF (Default)
48. Code 88 MON SUN 24HRS ON
49. Code 90 DIAL DISPLAY NBR
50. Code 91 ASK FOR DIAL 1? (Default)
51. Code 92 DISPLAY CODES FUNCTION
52. Code 95 # * SET Time/Date - D/Time Enabled (Default) or D/Time Disabled User Set
53. Code 96 # * REG CALL INVITED Invite All Valid Numbers (Default)
54. Code 97 # * REG CALL DISABLE Block All Calls Except Invited
55. Code 98 # * ALL NBR DELETED
56. Code 98 [number] * Delete specified number
57. Code 99 # * DIGITONE DEFAULT On reset, operating codes return to default list
58. Last Call Remote Entry Code * 1 # Invite, Code * 2 # Block, Code * 3 # VIP
Wildcarding (#)
When using the block or invite commands, you can use the # key to represent all numbers in a phone
number's column. In the phone number ex. 894 555 1212, if you want to block or invite all numbers (0-
9) in a single column you would insert the # key in that column. Examples: To block all numbers (0-9) in
the last column, you would use 40 894 555 121# *. To invite all numbers in the exchange 679 and area
code 894, use 50 894 679 *. To block all numbers in the exchange 555 use: 20 555 *.
Last Call Remote Entry
You can enter the LAST caller into the Caller Lists by dialing * 1 # to Invite, * 2 # to Block, or * 3 #
for VIP after a call. This is useful when you have installed the DPB in a basement, phone closet and are
using cordless phones away from the base unit. After entering one of these dialed commands, either
through Phones connected to the TEL port or Extension phones, you will hear a confirmation beep in the
phone's speaker. See the DPB display screen to verify entries when needed.
12
Page
8
6
5
6
5
8
9
6
5
5
6
9
9
9
9
9
9
9
10
10
9
9
10
10
10
10
10
10
10
11
10
10
11
11
11
11
12