ACU-RITE SENC 150 Kurulum Kılavuzu - Sayfa 4

Medya Dönüştürücü ACU-RITE SENC 150 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ACU-RITE SENC 150 6 sayfaları. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Ayrıca ACU-RITE SENC 150 için: Kurulum Kılavuzu (8 sayfalar), Referans Kılavuzu (20 sayfalar), Kurulum Kılavuzu (4 sayfalar), Talimatlar Kılavuzu (12 sayfalar)

Sayfayı Yazdır

SENC 150

Cross Feed Installation ...

* Supplied with encoder hardware

1/4" Flat washer

.09" thk. (2)

* 1/4-20 x 1" BHCS (2)

ENC 150 Encoder

Mounting Information...

These instructions are for mounting the 13" encoder to

the Series 1 knee mill. Bridgeport machines have the

encoder mounting holes provided since 1985. These

instructions assume these holes are present.

Before proceeding:

Please read the Procedure completely.

Mount X axis prior to installing the cross feed.

Clean the mounting surfaces.

Save the alignment brackets with the Encoder

Reference Manual after installation is completed.

First Steps ...

Machine

Move the table to its center of travel.

Mark the axis so that it can be re-centered easily.

Move the saddle completely forward on the knee.

P.N. 385072-214 Ed C 11/05

Spacer (2)

Spar

* 8-32 x 3/4" SHCS (2)

Low head screw

Installation Manual 385072-41

Encoder Installation Manual for: Bridgeport

Cross Feed Y Axis - Right hand side

Reading head mtg.

brkt.

Encoder

Unpack encoder in a safe, convenient location.

Do not remove the reading head alignment

brackets until instructed.

Center reading head ...

Alignment bracket (2)

•

Slide the reading head and brackets along the scale

case until the center marks on the scale case and

reading head are aligned.

Series I - Vertical Knee Mill

* M6 flat washer (2)

.017" thick

1/4-20 x 1-1/4" BHCS (2)

Align

center

marks

Acu-Rite Companies Inc.