Cisco CWDM-GBIC-1570 Kurulum Notları - Sayfa 25

Ağ Donanımı Cisco CWDM-GBIC-1570 için çevrimiçi göz atın veya pdf Kurulum Notları indirin. Cisco CWDM-GBIC-1570 36 sayfaları. Passive optical system
Ayrıca Cisco CWDM-GBIC-1570 için: Kurulum ve Teknik Özellikler Kılavuzu (24 sayfalar)

Sayfayı Yazdır

Connect the single pair fiber-optic cables from the CWDM GBIC transceivers or CWDM SFP

Step 4

transceivers (Tx/Rx; up to eight channels) to the 8-channel multiplexer/demultiplexer module equipment

connectors (Tx/Rx; up to eight wavelengths).

Note

Connect the network backbone single pair fiber-optic cable to the multiplexer/demultiplexer

Step 5

NETWORK connector on the OADM module.

Step 6

If you are planning to monitor your network with an optical power meter or an optical spectrum analyzer,

connect your meter or analyzer to the MONITOR port on the OADM.

Specifications

Table 5

modules.

Table 5

Item

Physical Characteristics

Dimensions

Weight

Environmental

Operating temperature

Storage temperature

78-16565-02

CWDM GBIC transceivers are equipped with SC connectors. To make connections to the LC

connectors on the multiplexer/demultiplexer device, you must use an LC to SC patch cable

(Cisco part number CAB-SM-LCSC-1M= [1 meter cable], CAB-SM-LCSC-5M= [5 meter

cable], or an equivalent patch cable).

Connect the Tx ports to the Rx ports and the Rx ports to the Tx ports to ensure that the system

operates correctly.

lists the environmental specifications for the CWDM OADM and multiplexer/demultiplexer

Table 6

lists the optical specifications for the CWDM OADM and multiplexer/demultiplexer

CWDM Passives Physical and Environmental Specifications

Specification

8.35 x 1.75 x 8.7 in. (212 x 44 x 221 mm)

1.5 lbs. (0.68 kg)

32 to 140 ºF (0 to 60ºC)

-40 to 185ºF (–40 to 85ºC)

Cisco CWDM Passive Optical System Installation Note

Specifications