Cisco Firepower 4100 Series Manuel - Sayfa 10

Ağ Donanımı Cisco Firepower 4100 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Firepower 4100 Series 38 sayfaları. Rack-mount and ground the chassis
Ayrıca Cisco Firepower 4100 Series için: Ürün Kılavuzu (17 sayfalar), Manuel (8 sayfalar), Bakım ve Yükseltme Kılavuzu (20 sayfalar), Manuel (36 sayfalar), Manuel (8 sayfalar), Manuel (42 sayfalar)

Sayfayı Yazdır
Cisco Firepower 4100 Series Manuel

Rear Panel

1
3
5
7
Rear Panel
The following figure shows the rear panel of the Firepower 4100.
Overview
10
Management
• Off—No connection or port is not in use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
SSD
• Off— SSD not present.
• Green—SSD is present; no activity.
• Green, flashing—SSD is active.
• Amber—SSD failure.
• Amber, flashing—Rebuilding, flashes at 1
Hz.
• Amber, flashing—Predictive failure analysis
(PFA) and hot spare; two fast flashes at 4
Hz, pause for 0.5 seconds.
Active (ACT)
This LED is not supported; reserved for future
use.
Network activity
• Off—No connection or port is not in use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
2
Health (SYS)
• Off—System is not booting yet.
• Green, flashing—Power-up diagnostics are
complete and system is booting up.
• Green—The system has passed power-up
diagnostics.
• Amber—Power-up diagnostics has failed.
• Amber, flashing—Alarm; power-up
diagnostics are running.
4
Power
• Off—Input power not detected.
• Green, flashing—Appears only when you
move the power switch from ON to OFF.
System is shutting down and powers off once
shutdown is completed.
• Amber—System is powering up.
• Green—System fully powered up.
• Amber, flashing—Reserved.
Locator LED
6
• Off—Locate is off.
• Blue—Locate is on.
Overview