Cisco Firepower 4110 Manuel - Sayfa 9
Ağ Donanımı Cisco Firepower 4110 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Firepower 4110 42 sayfaları. Rack-mount and ground the chassis
Ayrıca Cisco Firepower 4110 için: Bakım ve Yükseltme Kılavuzu (20 sayfalar), Manuel (36 sayfalar), Manuel (26 sayfalar), Manuel (8 sayfalar), Başlarken (42 sayfalar)
Overview
Network Ports
Management Port
Front Panel LEDs
The following figure and table describe the Firepower 4100 front panel LEDs.
Figure 6: Front Panel LEDs
• USB drive formatted with FAT32
• Boot kick-start image from the Supervisor ROMMON for discovery recovery purposes
• Copy files to and from workspace:/ and volatile:/ within local-mgmt. The most relevant files are:
• Core files
• Ethanalyzer packet captures
• Tech-support files
• Security module log files
• Platform bundle image upload using download image usbA:
The USB Type A port does not support Cisco Secure Package (CSP) image upload.
The Firepower 4100 chassis has eight fixed ports that require 1-Gb/10-Gb SFP/SFP+ transceivers (fiber
or copper). They are numbered from left to right starting with 1 and are named Ethernet 1/1 through
Ethernet 1/8. The 4100 also has two network module slots that support different numbers of ports
depending on the network module. See
See for
Supported SFP/SFP+ and QSFP Transceivers, on page 26
Each port has LEDs that represent link/activity status.
The Firepower 4100 chassis has a management port that requires a 1-Gb fiber or copper SFP.
Network Modules, on page 11
the list of supported transceivers.
Front Panel LEDs
for the supported network modules.
Overview
9