Digitrax DN126M2 Manuel - Sayfa 5

Medya Dönüştürücü Digitrax DN126M2 için çevrimiçi göz atın veya pdf Manuel indirin. Digitrax DN126M2 8 sayfaları.

controlled by CV57. The factory setting for this feature is 006 which is suitable for

most locos. You can adjust this value in the range of 000 for OFF to 015 for the

maximum effect. Consult your Digitrax Decoder Manual for info about CVs 55 &

56 and their effects on scaleable speed stabilization.

SuperSonic Silent Operation and Torque Compensation

The factory settings in the decoder provide silent, smooth operation of your loco-

motive under most conditions. For more information about these settings, please

see the Digitrax Decoder Manual or our website.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The initial factory set value is 000

for OFF. To turn on transponding, program CV61 to a value of 002. This al-

lows you to use Digitrax transponding to keep track of your rolling stock. When

transponding is enabled, the front light of the locomotive will flicker slightly to

indicate transponding signal is being communicated.

Decoder Reset CV08

Decoder reset lets you reset all CV values to the initial factory settings. To reset all

CV values, program CV08 to a value of 008. You also have the option of reset-

ting all the CV values except the 28 speed step tables and CV60 selected sound

scheme. To do this program CV08 to a value of 009.

— 5 —