argon audio ALTO A5 Hızlı Başlangıç - Sayfa 3

Konuşmacılar argon audio ALTO A5 için çevrimiçi göz atın veya pdf Hızlı Başlangıç indirin. argon audio ALTO A5 4 sayfaları.

Quick start

Start up

1. Connect the Alto Active Speaker with the Alto Passive Speaker, using

normal speaker cable. (remember to connect +to+ and –to-)

2. Connect the Power cord into an electric outlet and into the back of the Alto

Active Speaker. The LED light on the loudspeaker will light ORANGE.

3. Your speaker is automatically ready for Pair and Connect with Bluetooth

(BT), if you intend to use this function - Activate BT on your playback device

(mobile phone etc) and Scan for Devices. Your speaker will show up as

"ARGON ALTO". Press "pair" and you are connected. The LED light on the

speaker will change to solid BLUE. Start playback from you playback device

(mobile phone etc) there will be both a solid BLUE and a LIGHT BLUE LED,

indicating BT playback.

a. Notice; when you restart playback from BT, it will take 5-8 sec. before

sound will be heard from the speaker.

4. Besides BT, Argon Alto have four more input: Optical1, Optical2, AUX and

Phono. Use the included remote control to select your wished input.

5. When connecting a turntable to the RCA Phono input on the Alto speaker,

remember to also connect the ground wire from the turntable, to the metal

GND screw on the back side, below to the left from the Phone RCA

connectors of the Alto speaker.

6. If you have an Active Subwoofer, connect it to the Alto Speaker SUB

OUTPUT, using a RCA cable and then connect the cable to Your

Subwoofer.

Basic Operating

1. You can adjust the Master volume on the back of the Alto speaker.

a. It's recommended to set the Master volume at a rather high level.

b. Then control the daily volume level using Your Source player (Tablet,

Laptop, Mobile Phone etc), or the included remote.

2. Remote function from Samsung and Sony TV remotes. Argon Alto support

most Samsung and Sony remote functions for "Volume +/-" and "Mute". If

you use the Argon Alto with a Samsung or Sony TV it allows you to have

only one remote control (the TV remote) to control basic and useful

functions.

Tips

 Most Samsung and Sony TV remotes can control "volume" and "mute" on

the Argon Alto.

 We recommend a running-in time of your Alto Speakers of approximately

15-20 hours at normal listening level before you decide on the final

positioning of the Speakers. During the running-in time the drive units will

settle in and perform as intended.

 For optimal sound performance, the best listening position is on ear level

with the speakers placed not too far from a wall.

w w w . a r g o n a u d i o . c o m

AL T O A 4 / A 5