Digitrax SoundFX SDXN146K2 Manuel - Sayfa 6

Medya Dönüştürücü Digitrax SoundFX SDXN146K2 için çevrimiçi göz atın veya pdf Manuel indirin. Digitrax SoundFX SDXN146K2 12 sayfaları.

Digitrax SoundFX

System

Digitrax SoundFX lets you make your locos sound in scale like the real

thing! The SoundFX sound CVs in the range of CV140 to CV256 let you

customize your decoder without having to reprogram or change the in-

stalled sound scheme.

Diesel Notching CV132 and 155

Sound CV155 is provided to select Diesel engine "notching" modes. The

default of CV155= 00 provides "automatic notching" that changes the

diesel RPM settings at 8 distinct throttle speeds that are controlled by

Sound CV132. Sound CV155=01 selects "semi-automatic notching" mode

that allows F6 ON to increase the notch from the current throttle setting

and F7 ON to decrease back towards the lowest current throttle notch

setting. Sound CV155=02 selects "manual notching" mode that allows F6

ON to increase the notch setting and F7 ON to decrease the notch setting

irrespective of the throttle setting, which controls just the motor speed.

Steam Chuff / Cam Configuration and Gear Rotation

Trim CV133 and 134

CV133 controls the Steam Chuff / Cam configuration in the decoder it

allows you to get the value of the CV equal to the diameter of the driver in

inches from 1-27 or to set the CV to 128 to enable the external cam lead.

CV134 controls the gear rotation trim where a value of 32 equals a 100%

ratio.

Bell and Air Effect Rates CV146-149

CV146 controls the bell rate or time between ring of the bell, it has a

range from 1-100 with each increment adding 24ms of delay. CV147 con-

trols the drier rate, it has a rage from 1-64 with each increment adding

about 2 seconds. CV148 controls the Compressor/ Air pump start rate

and CV149 controls how long the Compressor/ Air Pump runs.

Auto Coupler Sequence Threshold Value CV151

CV151 controls the threshold at which coupler and brake sounds are

automatically played when locomotive direction is changed and function

3 is enabled. CV151 has a range of 0-60.

— 6 —