Digitrax DN143IP Kullanıcı Kılavuzu - Sayfa 5

Kontrolör Digitrax DN143IP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Digitrax DN143IP 8 sayfaları. Complete train control

Other LocoMotion

Travel & Scaleable Speed Stabilization (Back EMF) Features

Switching speed is controlled by CV54. The factory setting is 000 for OFF. To

turn on the switching speed feature, program CV54 to a value of 001. When

this feature is on, use F6 to activate and deactivate switching speed. When

switching speed is ON and F6 is ON, the switching speed feature is on. With

the feature ON, the throttle's target speed is effectively reduced by about 50%

and the effects of accel and decel programmed into the decoder are reduced by

1/4. This is useful for yard switching operations.

Normal Direction of Travel is controlled by CV29. See your decoder manual

for additional information on the settings for CV29.

The intensity, or droop, of Scaleable Speed Stabilization (Back EMF) is con-

trolled by CV57. The factory setting for this feature is 006 which is suitable for

most locos. You can adjust this value in the range of 000 for OFF to 015 for the

maximum effect. Consult your Digitrax Decoder Manual for info about CVs 55

& 56 and their effects on scaleable speed stabilization.

SuperSonic

Silent Operation and Torque Compensation

The factory settings in the decoder provide silent, smooth operation of your

locomotive under most conditions. For more information about these settings,

please see the Digitrax Decoder Manual or our website.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The initial factory set value is

000 for OFF. To turn ON transponding, program CV61 to a value of 002. This

allows you to use Digitrax transponding to keep track of your rolling stock.

When transponding is enabled, the front light of the locomotive will flicker

slightly to indicate transponding signal is being communicated. For optimal

transponding operation, we recommend that you hook up the forward and rear

lights as shown in the wiring diagram (Figure 1).

Decoder Reset CV08

Decoder reset lets you reset all CV values to the initial factory settings. To

reset all CV values, program CV08 to a value of 008. You also have the option

of resetting all values except the 28 speed step tables. To do this, program

CV08 to a value of 009.

2443 Transmitter RD

Panama City, FL 32404

www.digitrax.com

Features: Switching Speed, Normal Direction of

www.digitrax.com

850-872-9890

850-872-9557