Argonaut A615 SMFD Kullanıcı Kılavuzu - Sayfa 5

Monitör Argonaut A615 SMFD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Argonaut A615 SMFD 20 sayfaları. Smart multi function display

submersion or high pressure water. Do not pull or strain cabling as this can break the cable clamp

seal.

Quick-Start Instructions

1.) Connect power as described in "Wiring" section below. Upon power connection, you will see the

Argonaut logo boot screen for several seconds during boot up followed by the home screen.

2.) Connect the included optical mouse to navigate the screen and make any initial changes to settings

or Apps.

3.) Connect additional signal input cables from signal output devices (for example PC, camera, black

box, etc.). The default signal input is from the internal Android processor board and labeled

"Analog Input" in the signal input menu screen. This input will automatically load on boot up.

4.) All android functions are controlled by external USB mouse or touch pad. Front bezel buttons

control LCD functions such as switching signal inputs and dimming control (button control

summary on page 7).

5.) Power down the system by clicking on the power icon. You can also put the display in power

conserving sleep mode by pressing the physical power button (this turns off the LCD however the

android processor will continue running in the background for instant access upon pressing the

power button again). Disconnecting external power or flipping a breaker to the off position is

another way to shut down the system. Note: Once powered down through power icon or

disconnected power, the system will not restart by pressing the physical power button. In

order to power up, either reconnect to power if already disconnected or flip the appropriate

breaker switch to off then on to restart.

Page