Cisco PIX 506E Hızlı Başlangıç Kılavuzu - Sayfa 10
Ağ Donanımı Cisco PIX 506E için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco PIX 506E 18 sayfaları. Chapter 3
Ayrıca Cisco PIX 506E için: Hızlı Başlangıç Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (8 sayfalar)
Sayfayı Yazdır
8
Alternative Ways to Access the PIX 506/506E
You can use a serial terminal emulator from a PC or workstation connected to the Console port for
local administrative access.
You can also use PDM or a console to configure Telnet access to the PIX 506/506E. By default, Telnet
access is not permitted. To Telnet to the PIX 506/506E from the outside perimeter of the firewall,
configure an outside IP address and IPSec for a secure Telnet session. For more information, refer to
the Cisco PIX Firewall and VPN Configuration Guide.
AC T
LI NK
ET HE RN
ET 1
PC terminal adapter
To connect a console for local administrative access:
Plug one end of the console cable adapter into a standard 9-pin PC serial port.
Step 1
Step 2
Plug one end of the blue console cable (72-1259-01) into the PC terminal adapter.
Plug the other end of the blue console cable into the Console port.
Step 3
Step 4
Configure the PC terminal emulation software or terminal for 9600 baud, 8 data bits, no
parity, and 1 stop bit.
Refer to the Cisco PIX Firewall and VPN Configuration Guide for information about how to use the
command-line interface (CLI).
10
DC
AC T
PO W ER
LI NK
DC
IN PU T
ET HE RN
PO W ER
ET 0
IN PU T
US B
CO NS O LE
Cisco PIX 506E
Blue console cable