Cisco Prisma EtherLinX Kurulum Talimatları Kılavuzu - Sayfa 13

Ağ Donanımı Cisco Prisma EtherLinX için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Cisco Prisma EtherLinX 38 sayfaları.

Laser Safety

Introduction

This equipment contains an infrared laser that transmits intensity-modulated light

and emits invisible radiation.

Warning: Radiation

WARNINGS:

• Avoid personal injury! Use of controls, adjustments, or performance of

procedures other than those specified herein may result in hazardous

radiation exposure.

• Avoid personal injury! The laser light source on this equipment (if a

transmitter) or the fiber cables connected to this equipment emit invisible

laser radiation. Avoid direct exposure to the laser light source.

• Avoid personal injury! Viewing the laser output (if a transmitter) or fiber

cable with optical instruments (such as eye loupes, magnifiers, or

microscopes) may pose an eye hazard.

• Do not apply power to this equipment if the fiber is unmated or unterminated.

• Do not stare into an unmated fiber or at any mirror-like surface that could reflect

light that is emitted from an unterminated fiber.

• Do not view an activated fiber with optical instruments (e.g., eye loupes,

magnifiers, microscopes).

• Use safety-approved optical fiber cable to maintain compliance with applicable

laser safety requirements.

Warning: Fiber Optic Cables

WARNING:

Avoid personal injury! Qualified service personnel may only perform the

procedures in this document. Wear safety glasses and use extreme caution when

handling fiber optic cables, particularly during splicing or terminating

operations. The thin glass fiber core at the center of the cable is fragile when

exposed by the removal of cladding and buffer material. It easily fragments into

glass splinters. Using tweezers, place splinters immediately in a sealed waste

container and dispose of them safely in accordance with local regulations.

4008226 Rev B

Continued on next page