AcueLighting Legend 380 Kullanıcı Kılavuzu - Sayfa 12

Aydınlatma Ekipmanları AcueLighting Legend 380 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AcueLighting Legend 380 19 sayfaları.

male connector (input).

Note: It doesn't matter which fixture address is the first one connected. We

recommend connecting the fixtures in terms of their proximity to the controller,

rather than connecting the lowest fixture number first, and so on.

Step 3: Connect other fixtures in the chain from output to input as above.

Place a DMX terminator on the output of the final fixture to ensure best

communication.

Fixture Linking (M/S Mode)

1. Connect the male connector side of the DMX cable to the output female

connector of the first fixture.

2. Connect the end of the cable coming from the first fixture which will have a

female connector to the input connector of the next fixture consisting of a male

connector. Then, proceed to connect from the output as stated above to the

input of the following fixture and so on.

NOTE:

Master-Slave and Standalone

operation requires that the first

fixture in the chain be initialized for

this purpose via either setting in

the control panel. Second. the

fixtures that follow may also

require a slave setting.

Often, the setup for